Fixe 1 Hanger 10mm Stainless Steel

The Fixe 1 10mm Hanger is made from 316L Stainless Steel for outdoor use and makes for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.

Thanks to its shape, when placed on a roof, the carabiner will be routed so that it never comes into contact with the projecting head of the bolt anchor.

Fixe Conical Washer - The rim of the bolt anchor hole protrudes slightly into a conical shape, away from the wall. The act of pulling the bolt anchor will generate a spring effect that provides constant pressure against the wall, multiplying the strength of the torque. It also allows having a better touch upon the torque tightening.

It maintains a constant pressure that expands the force between the bolt anchor and the wall. Over the years, bolt anchors can undergo small rotations, which lead to a space between the bolt and the wall, causing a movement in the hanger. The total of fixing pins and the conical washer allows the bolt anchor to be removed by rotating up to 45º without losing contact with the wall (previously it only supported 20º).

Fixing pin -By increasing the distance between the hole of the bolt anchor with the three fixing pins, a greater resistance (tightening torque) to the hanger once
installed is achieved. Applying more force to prevent the hanger from rotating
and becoming mobile.

Lighter - With a thickness of 3.5mm (previously 4mm) Fixe has managed to reduce the weight of the hangers that stand out for their lightness, reducing their weight by 12.5% in the 316L steel version. It has gone from 64g to 57g.

Specification